Knitting a fashionable large cape sweater with knitting needles
Knitting a fashionable large cape sweater with knitting needles, with detailed knitting guide and structural diagram
Knitting a fashionable large cape sweater with knitting needles, with detailed knitting guide and structural diagram
Using yarn
Merge two blue yarns with one dark gray yarn, a total of 3 colors and 6 strands, choose a 5.0mm needle body and a 4.5mm needle edge, and keep the density of 19x22 needles for knitting.
Brief overview of knitting process
The following is the knitting method for small size.
First, use a small needle to start the edge, knit a 234-needle machine edge, and allocate 66 needles on both sides as the front piece and 98 needles on the back piece. Next, knit a 6.5cm piece of knitting part with single thread knitting. Then, switch to a large needle, keep 2 needles on each side, and start knitting the reverse part.
The reverse process is as follows
On the front, after knitting the right front piece and the back piece, start knitting the 2 needles of the left front piece and reverse the next needle. Then turn the fabric to the reverse side and repeat the same reverse operation. Repeat this process, pulling 3 stitches on each side each time until it is completed.
After pulling the needle back,
Continue to knit a 5cm body part with the flat knitting method. The next step is to leave a pocket. At the junction of the front and back pieces, leave 22 stitches on the front piece without knitting, put them on the other line, and then start 22 stitches again to fill the gap. When the total length is 40.5cm, the body part is divided into 3 pieces: 44.5cm for each of the two front pieces, and 16.5cm for the back piece, and use a large needle sleeve to close it.
The next step is to stitch and sew. The reverse sides of the two front pieces left on the needle are facing each other and stitched, and the stitches are displayed on the front, and then seamlessly sewed with the back piece. For further reference, please refer to the structure diagram.
The knitting method of the sleeve is to pick up 58 stitches, knit a 5cm part in a circle knitting method, and then increase to 40cm in a 7-2-10 method. Then switch to a small knitting single thread of 10cm and close it. Discount Code
Finally, the knitting and sewing of the pocket.
Move the 22 stitches on the parting line to the large needle and knit a 2.5cm section with single thread knitting. Then pick up 22 stitches at the gap and knit a 14cm section with flat knitting. Sew the pocket on the corresponding reverse side and sew the edge on the front side. At this point, the knitting and sewing of the fashionable large cape sweater are all completed.
Knitting in accordance with the small size will show the fashionable effect of the original. If you continue to knit longer after dividing the sleeves, you can show the characteristic effect of the large cape sweater I knitted.
Tina's knitting art
Knitting in accordance with the small size, we can show the fashionable charm of the original. And if we further extend the knitting to a longer length, we can highlight the characteristic style of the unique large cape sweater I designed.
The carefully knitted Korean-style trumpet sleeve long skirt sweater is beautiful and comes with detailed knitting process instructions, so you can easily master the production skills.
Front part:
Use needle No. 9 to start with 172 stitches, knit into 4 down and 2 up stitches, a total of 80 rows, and the length reaches 26cm. At the 20th row, close 2 stitches each time, a total of 5 times, a total of 12 times. Please note that in the 80th row, knit the lower stitches, which appear as upper stitches on the front.
Next, use No. 10 knitting for the remaining 160 stitches, use the 2 down and 2 up stitches, and close 2 stitches in the middle, and finally keep 158 stitches. Knit 40 rows in total, and the length reaches 12cm.
After that, leave 8 stitches in the middle, knit 75 stitches on each side, and knit 20 rows in total, with a length of 6cm. After completing this step, you can start knitting the shoulder part. Please note that in the 60th row, you also need to knit the lower stitches.
The knitting method of the shoulder part is: close 7 stitches first, leaving 68 stitches. Use the method of reducing 4 stitches every 4 rows to reduce stitches, and start reducing the collar at the same time as reducing the 10th 2 stitches. The method of reducing the collar is: first reduce 3 stitches every 2 rows, then reduce 2 stitches every 2 rows, and finally reduce 1 stitch every 2 rows, and continue this way until there are 5 stitches left.
Next, we will knit the back piece. Blue NHS Discount Code
Use the 9th needle to cast on 166 stitches, using the flat needle method, and then knit 4 down and 2 up stitches, a total of 80 rows, and the length reaches 26cm. Please note that in the 80th row, you need to knit the lower stitches, so that it will appear as an upper stitch on the front.
Next, reduce 2 stitches once every 20 rows, a total of 5 times, that is, reduce 2 stitches 5 times every 10 rows, a total of 12 times. After completing these reduction operations, the number of stitches remaining will be changed to 154.
Then, use the 10th needle to knit these 154 stitches, using the 2 down and 2 up stitch method, a total of 60 rows, and the length increases to 18cm. At this point, you can start knitting the shoulder strap. Similarly, you need to knit down at the 60th row to keep the correct knitting method.
The knitting method for the shoulder strap is: after 7 stitches on each side, the remaining number of stitches will be 140. After that, use the method of 8 stitches every 4 rows to knit, that is, 6 stitches on each side are combined into 2 stitches, and knit 8 times in total. Then use the method of 4 stitches every 4 rows to knit, that is, 4 stitches on each side are combined into 2 stitches, and knit 5 times in total. In this way, the knitting of the shoulder strap is completed.
Next, we will start knitting the sleeves. Use the No. 9 needle to cast on 112 stitches, and also use the flat needle cast on method. After knitting 4 down and 2 up stitches, knit 2 stitches once every 10 rows, and knit 6 times in total. In this way, the knitting of the sleeves is completed.
Use the No. 10 needle to continue knitting 2 stitches down, a total of 60 rows, and then knit 7 stitches on both sides of the shoulder strap. Next, knit 4 stitches every 4 rows, and continue to knit 13 times. Voucher Code
After completing these operations, we get the size of the finished garment: length 67cm, chest 80cm, waist 90cm, hem width 130cm, sleeve length 70cm, and cuff width 36cm.
In addition, the knitting method of the front piece is as follows: first, cast on 172 stitches, use the 20-1-1 and 4-1-17 needle reduction method, knit 90 rows in total and receive 130 stitches. Then, switch to the 11-needle to continue knitting 36 rows and remove 12 stitches in the middle (this is the placket part). After that, knit 16 rows and switch back to the 10-needle to knit 16 rows to start knitting the shoulder strap. After removing 11 stitches on both sides of the shoulder strap, when the 9th 2 stitches are received, the collar part is also closed at the same time, using the 2-3-1 and 2-2-1 needle reduction method, and finally the remaining 5 stitches are received.
The knitting of the back piece is similar to the front piece, also casting 172 stitches and using the same needle reduction method. However, in the process of knitting the back piece, after switching to No. 11 for 52 rows, switch back to No. 10 for 16 rows to start knitting the shoulder strap. The shoulder straps are also reduced by 11 stitches on both sides, and then 2 stitches are reduced on both sides every 4 rows, and the reduction is continued for 13 times.
The sleeves start with 112 stitches, using the 16-1-1 and 4-1-18 reduction methods, and a total of 70 stitches are obtained after 90 rows. Then, switch to No. 11 for 52 rows with 2 stitches added every 4 rows, and then switch back to No. 10 for 16 rows and start to close the sleeve cap.
Finally, we get a total of 172 stitches for the collar. At the same time, Figure 2 shows another set of dimensions of the finished garment: length 69cm, chest circumference 75cm, waist circumference 82cm, hem width 130cm, sleeve length 75cm, and cuff width 36cm.
What's Your Reaction?






